The log keyword of an ACL doesn't seem to work, take this simple policy as an example:
entry permit_ICMP {
if {
protocol icmp;
}
then {
permit;
mirror-cpu;
log;
count icmp;
...
Hi,
I have 2 summit x450a that after they were reset to factory default the switches started up with blank configuration as can be seen from the attached sample below and except for vlan that I was able to configure every other c...
Now when i upgrad to Xos new version i found some serious bug happen for TCl function
1:that 30B-01.8 # set var a $TCL(clock format [clock seconds] -format "%Y")
Error:invalid command name "file"
although that "clock seconds" bug resolve but it som...
We are getting reverse traffic although EAPS we did but all in vein when we have heavy traffic then it plays well but 1Mb its not supportive same in the case of RSTP/STP. Currently we are using Summit 460 with having multicast traffic all around.... ...
Is it possible to configure static routes to manage specific networks only. Let me explain, I want 2 specific networks to traverse my switches (one side is trust and one is untrust - METRO E circuit) and wanted to find out if I can just configure 2 ...
