ExtremeSwitching (Other) - Page 103 - Extreme Networks

ExtremeSwitching (Other)

Questions and discussions about switching in general

Forum Posts

Sorted by:

Start a conversation

Disable stacking errors when using one switch in stacking mode?

Have been troubleshooting some issues on X440 switches this week and one of the tools we use scrapes the logs for errors in addition from pulling data via SNMP. I noticed (for the first time), that the 440's throw a stacking error when they're setup...

Creating a Port Channel/Lag from Cisco to Enterasys

My name is Gary Rollie I am a Global Solution Engineer, I have a CCIE, JNCIE, as well as many other certs and publications. I currently work for Enterasys and have worked here for the past 6 years. On the ETS side it’s really simple. SSA-150-F...

BD 8810 ISC problem with LAG to ESXi host

Hello everyone! We are experiencing problem with teaming NICs between ESXi host and BD 8810 stacked with ISC. Interface sharing on switch is configured in Static L3_L4 mode and NIC teaming in ESXi is configured as "Route based on IP hash". After a m...

2016-12-05: New GTAC Knowledge Articles November 27 - December 03, 2016

Here are the new articles that were published November 27 - December 03, 2016 in GTAC Knowledge: Sunday, November 27, 2016: What are reason for seeing this message: This is from manager 1 %% SNTP Socket close -1 Monday, November 28, 2016: WS-AP-393...

VIP can't see device in same switch and VLAN with LACP/LAG problem to the core.

Strange issue I suspect is related to possible LACP sharing method mismatch between Avaya ERS5xxx and XOS on x440's. 8 x440's connected back using port 47/48 to a Nortel/Avaya ERS core using LACP. Also a stack of 5 x450G2's which are used as a voice...

Top Kudoed Authors

User

Count

28

4

4

3

3

GTM-P2G8KFN