ExtremeSwitching (Other) - Page 124 - Extreme Networks

ExtremeSwitching (Other)

Questions and discussions about switching in general

Forum Posts

Sorted by:

Start a conversation

lost operational code / firmware due to internal battery replacement ?

After some years of use we stop and clean C3G124-48 and also replace internal bateries after doing that never more the switch boot up to operational code. We think the system lost the firmware due to replacement of this battery (is this possible??) ...

Visio Stencils with Connection Points

Hi, At some point could the visio stencils for current or at least future products include connection points on the device. I know they can be manually added, but it is one of those little things that ends up taking a lot of time up over the long te...

Summit X670G2-48x-4q Stacking

Hey Guys, we have two X670G2-48x-4q and want to build a Fail Over System. The first choice, what is better, MLAG or Stacking? For Stacking i have some questions: License type Advanced edge correct? Can we use two of the 40G qsfp cables for the stac...

snoop_cache_unresolved

hi, we have a stack with X460-G2 in summitstack. EXOS is running in 15.6.3.1 v1563b1-patch1-8 The stacks has 6 members, with 2 uplink 10Gb/s to Cisco Core. I think we have multicast problem : in logs, i have : Slot-1: exosSnoop: snoop_cache_unresolv...

couldn't ping a network printer connected on a port

I am trying to add a network printer in the Printer Management. The printer has been connected to port 4:40 on a Extreme router. This port has been configured with a vlan that specifically for all my printers. I was able to see its mac address in the...

Top Kudoed Authors

User

Count

28

4

4

3

3

GTM-P2G8KFN