Sir, In our Network, We are getting "Request timed out" frequently for a Particular Vlan. For Example, If We have two vlan's(one is having 10.1.2.x IP Series and another one is having 10.1.57.x IP Series) in one of our switch, The Vlan having 10.1.2...
Simple one. After enabling snmp on the switch? Where should I configure IP address on switch ? I mean on VLAN/Loopback/Interface etc.?
Here are the new articles that were published last week (July 26 - August 1, 2015) in GTAC Knowledge: Sunday July 26, 2015 Netsight install fails with Installer exiting with code: 127 Monday July 27, 2015 OSPF neighbor is in Init state Change in mi...
Hello Everyone, I am currently having an issue pulling device info from my Blackdiamond cores and stacked Summit series switches via SNMP (Both v2 and V3 produce same results). My non-stacked Summit series switches are not experiencing this issue a...
Hi , Please advice, After Stacking 2 Switches X670-48t with both switches port 47-48 with Extreme 10306 SFP+ Cable. My switch port 45 and 46 not able to working with copper connected with port 45 and 46. Attach some config photo .
