ExtremeSwitching (Other) - Page 142 - Extreme Networks

ExtremeSwitching (Other)

Questions and discussions about switching in general

Forum Posts

Sorted by:

Start a conversation

ELRP uplink port question

We are running ELRP on all our ports. including the 10gig ports; that we use for our backbone. on stacks with the 460 48 port switches. We had a loop created when two switches were connected via 1gig ports ( ex stack 1 port 12 to stack 2 port . As e...

Moving from PPPoE to QinQ

hi guys, i have a link i want to configure qing. now on this link there is a PPPoe connection and other vlans for other services through the same port. how can i use Qinq.

Zero Touch Provisioning (stacking)

We would like to use Zero Touch Provisioning for configuring almost 100 summit switches. By default, we usually enable stack features on all our switches. But this, normally require a reboot before applying the switch config. Would anybody know how ...

Extreme Summit 400-48 port stuck on boot

When i boot my Extreme Summit 400-48 port it hangs. When i connect serial cable it display Decompressing primary image from flash ..........................................+ It gets stuck after the + sign. It stays there forever. I try going into boo...

Stack master flip

The power dropped to my master and thus the two switches flipped roles. How do I flip them back without just power cycling the now master?

Top Kudoed Authors

User

Count

28

4

4

3

3

GTM-P2G8KFN