I have a K-12 switch and one of the blades stopped working. So I replaced the blade and the status light did not come on, and none of the ports on that blade work. What could be the problem?
Hi,
On the siwtch 800 series, i associated a vlan created and a ip @ with the system.
#Config ipif System ipaddress 192.168.1.254/24
#config ipif System vlan admin
Is there any command which approach those ones on switch x440?
What does the following message means in logging buffer. System is a S-Series Device with Firmware Version 8.21.02.0001
Dune[5.dTcmTask]Petra[0] Received Interrupt PB_IRE_BURST_ERR_FOLLOW_SOP_IS_ERR instance 0, count 2, value= 0x1
Hi im using a X670G2-48x-4q with the firmware v15.7.1.4
I want to use some 10/100/1000 BaseT SPF but they wont show link.
I have configured the with the command
"
configure ports x auto on speed 1000 duplex full
"
can you help me out is there somt...
Dear Hubbers
With this week's announcement of the End-of-Sales date (31 Dec 2014) for various S-Series S150 and S155 classes of modules, where may I find a reminder of the rules of mixing S150/S155 and S140/S180 modules in S6 and S8 chassis?
Thanks...
