ExtremeSwitching (Other) - Page 154 - Extreme Networks

ExtremeSwitching (Other)

Questions and discussions about switching in general

Forum Posts

Sorted by:

Start a conversation

S- Series SSA180 NAT question

Hi! I have a question to NAT on an enterasys S-Series! Is it possible to do source NAT and destination NAT at once? At the inside Interface there should be changed the destination address and at the outside interface the source address: for exampl...

Is there any way to run C3G124-48 HW diagnostics?

Hi everybody, I need to know If there is any CLI command (or NetSight Applications tool) I can use to check a Securestack C3 switch for HW issues. I tried the various "show port ..." commands, but they only show if ports are admin and operationally ...

How to analyse PADR packets drop on ExtrmeSwitch

All the ports on the switch are used and I would like to to know how to analyse the PADR [PPPoE] packet drops on the extrmeSwitch.

How to enable telnet for specific IP?

How to enable telnet for specific IPS for example for ip 167.28.170.99 & 167.28.137.57

K-Series SFP+ port usability

Does the K-Series Fabric card support the use of the MGBIC part number transceivers for 1Gige connectivity? I found the following but it only makes specific reference to the S-Series:https://community.extremenetworks.com/extreme/topics/s_series_10g_...

Top Kudoed Authors

User

Count

28

4

4

3

3

GTM-P2G8KFN