we have several stacking on the network with 15.2 version, we are planning to swap-out some of them and at the same time update the version. what is the usual practice to do this?
S-Series firmware 08.31.01.0006 has introduced the new "show port transceiver" command set which is great, however it does not appear to work for transceivers in tg.x.1-4 and tg.x.101-104 in a SK5208-0808-F6 with 2x SOK2208-0204 in a S6 chassis. tg....
For the purpose of this thread I have assumed that antispoofing to be configured with a value that's default on the C series, DHCP snooping feature of 15pps.
In order to do this the configuration has been configured as follows (450 / 30 = 15):
set ...
Hi Team
We are getting issue in switching between A4 switch to C5 Switch issue is whenever we set the port speed of both interconnected port to 1000mpbs then link get disconnect and when we keep it 100Mbps then only it works. We did all the po...
Hi All,
I'm just looking in the requirements for stacking 2 Summit devices. 1 is an x440-48p the other an x440-24p.
Can someone confirm that we require 2 Stack cables, which would be connected as a 1-2 & 2-1 configuration between the devices. A col...
