ExtremeSwitching (Other)
Questions and discussions about switching in general
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

ONA or xa1400 for FE

Hello, partners on my country tell me the “ONA” is going out of date and recomend implement “xa1400” for fabric. What is the difference? and is that true ONA going out of date?.    Thanks, Joan Ale

Joanale by New Contributor
  • 724 Views
  • 0 replies
  • 0 kudos

ISW Input/Output Electrical Isolation

Hi All,   A question has been raised to us about the level of electrical isolation between the input power to the ISW switch and the output power of the POE+ ports. This has to do with the earthing issues that’s being encountered on site. Could someo...

acidcool by New Contributor
  • 423 Views
  • 0 replies
  • 0 kudos

200 series switch not passing any traffic

Hello everyone, I have a C210 (210-48t-GE4) switch that is not passing any traffic.  It is not seeing any MAC addresses learned on any of the access ports.  I ran into this article https://extremeportal.force.com/ExtrArticleDetail?an=000078060 But th...

hw problems with B5G124-48

Hello, We have a stack with B5G124-48 switches and we have some problems with hardware. One switch of them is resetting continuosly and in other switch, I think that some ports are bad because the switch run OK, leds OK but when connect the cable, th...

Igor_GF_ by New Contributor
  • 532 Views
  • 0 replies
  • 0 kudos
GTM-P2G8KFN