ExtremeSwitching (Other) - Page 40 - Extreme Networks

ExtremeSwitching (Other)

Questions and discussions about switching in general

Forum Posts

Sorted by:

Start a conversation

Not able to configure IPv6 bootprelay

Hi, code:# configure bootprelay ipv6 add fe80::21b:21ff:febc:798c%skat2-in ^%% Invalid IPv6 address detected at '^' marker.# show version | include XOSImage : ExtremeXOS version 15.5.2.9 v1552b9-patch1-5 by release-ma...

Remote Mirroring with EAPS not working

Hello Community, need help for understanding and setup correct Remote Mirroring over EAPS. If I follow the steps from the configuration guide, mirroring is not working! After putting the commands via CLI: code:enable mirror to port-list 8:2,1:48 ...

IPv6 - Linux ping to "network IP" gets a reply. Why?

So I'm still considering myself as being relatively new/inexperienced to IPv6, but I stumbled across something that seems odd to me. I have a pair of BD8800s (EXOS 16.1.3.6 patch1-9) as core L3 switches. In VR-Default, I configured BD-1: code:create...

Same Mac Address learnt in two different port accessing two different VLAN

Dear What happen if I receive the same Mac Address in two different port of a single switch. Of course the ports of the switch are in two different VLAN. The switch is Extreme X460 G2 (or X440 G2). I have never used an Extreme switch and I still did...

How to upload the config file from TFTP server to switch and restore it using CLI?

I would like to use the Command Line Interface to upload my previously saved config file from my tftp server to the Extreme 200 series switch and make the switch to use that configuration. What are the commands that i can use in order to do that?

Top Kudoed Authors

User

Count

28

4

4

3

3

GTM-P2G8KFN