We have about 30 x 220 series switches installed at our sites. After +- a week SSH access to the switches stops working completely. We have telnet disabled and only ssh access enabled. Rebooting always resolves the issue. Running latest firmware at t...
Hello I want to mac authenticate C5 with X450. In X450 I enabled netlogin mac auth and tested with other X450 but when a connect C5 link is up and nothing happens. RADIUS are not triggered. Do I need make any configuration in C5? Thanks in advanc...
Hello, team, "220-Series 48 port 10/100/1000BASE-T, 4 10GbE unpopulated SFP+ ports (2 LRM Capable), 1 Fixed AC PSU, 1 RPS port, L2 Switching with RIP and Static Routes, 1 country-specific power cord" Does it mean that only two SFP+ ports c...
I have an ISW 8GBP prepped to be installed. I have Loop Protection enabled on all ports but the 4 SFP ports. I don't want want those to go down if a loop is plugged in somewhere else on the network or on this switch. I have a loop plugged into por...
Appreciate if someone can explain clearly the use case of command "enable ospf mpls-next-hop " & "enable iproute mpls-next-hop".
