This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject
Help
ExtremeSwitching (Other)
Questions and discussions about switching in general
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Start a conversation

deny specific prefixes in bgp

Hi, i am trying to deny exact prefixes 66.133.0.0/23 and 66.133.2.0/23 from being advertised and allow everyhting else to an iBGP neighbor (214.63.21.4) the configuration should be done on 214.63.21.3. using a neighbor route-policy command. Neighb...

Elie_Raad by • New Contributor
  • 2476 Views
  • 16 replies
  • 0 kudos

internet access via extreme summit x460-24t switch

Here is the situation I have ether cable coming out from my modem which I connect to my PC , then internet works on that PC. BTW , my PC isset to get ip and dns server via DHCP. Now I want to give internet access to six servers connected directly to ...

sumeet by • New Contributor
  • 1437 Views
  • 4 replies
  • 0 kudos

Flapping circuits.

Hello, I am trying to Turn the ports but before I check the A-side and Z-side circuits and both circuits are flapping every hour. So I instruct DCO guys to clean the fibers on both side, but still the circuits are flapping continuously. So could be d...

Arpan by • New Contributor
  • 725 Views
  • 2 replies
  • 0 kudos

x450 xOS16.1.3.6 CLI CPU Load

Hello everyone, First questing on this community as I've searched for a while and couldn't really find an answer. I manage a set of x450 switches which are all running xOS16.1.3.6. Sadly we don't have TFTP or ssh/sftp insfrastruture to be able to ...

GTM-P2G8KFN