ExtremeWireless (General) - Page 48 - Extreme Networks

ExtremeWireless (General)

Questions and discussions about wireless in general

Forum Posts

Sorted by:

Start a conversation

Authentication VLAN failure - Not working?

Evening everyone, I seem to have an issue with the authentication VLAN on our X440-G2 switches but not all. Comparing config side by side there doesn't seem to be any difference. Netlogin is enabled and configured on the majority of ports 802.1x &...

NAC Monitoring Mode

Any suggestions on the best way to turn monitoring mode on without policy so to gather information on server ports, source and destination addresses. The objective is use that information to create policies. Thanks, YPL

NAC display no information device type/ family when host has static ip

I have printers with static ip adressen. I mis the information device family and device type. Is it possible to get this information ?

Migrating from 7131 to 7562 as a co-deployment

We are looking to migrate from the 7131s to the 7562. The issue arises in that we are deploying in a mobile environment.. Migrating from WiNG 4 to WiNG 5 won't work for us as they're incompatible and we don't know when a particle AP will be meshing w...

Resolved! NAC authentication and mgmt authentication with the same radius servers

In my test environment I have a switch (X440G2 22.7.1.2) configured for NAC with two radius servers. In the AAA configuration I see two netlogin radius entry’s and the radius mgmt.-access is disabled and the policy works fine. As expansion on the ...

Top Kudoed Authors

User

Count

12

8

8

6

5

GTM-P2G8KFN