ExtremeWireless (General) - Page 88 - Extreme Networks

ExtremeWireless (General)

Questions and discussions about wireless in general

Forum Posts

Sorted by:

Start a conversation

S4 will not authenticate using TACACS+ server.

My S4 will not authenticate CLI access using our TACACS server. It looks like all of the settings are correct; tacacs is enabled and authentication login is set to 'any'. I have mirrored this on a deployed C5 with zero issues. The S4 is not hittin...

Simulating an Openflow controller

is there any simulator for using Openflow controller instead of Open-Flow Switches ..if so , Pls guide me

NAC GW loses resolved IP

We have a captive wireless clients, which are registering by the captive portal running on a NAC GW. When the client ends the registration process, I can see the resolved IP address of the client in the NAC console, but after a short time, about 10-2...

Radius Access Req and Accounting for same session from different devices IPs

We are using third party wireless devices which send radius access requests to our NAC appliances which works great. Problem is the accounting packets are coming from another device / source ip to the nac gateway (all accounting proxied through anoth...

Radius password length

The Extreme XOS is not fully compliant with the RADIUS RFC 2865. https://tools.ietf.org/html/rfc2865 In the RFC, the length of user is recommended to support at least 64 chars, and for the password at least 128 chars. But the XOS implementation li...

Top Kudoed Authors

User

Count

12

9

6

5

5

GTM-P2G8KFN