I've connected 2x AP3935i-ROW to a 08H20G4-24P but it looks like that the APs don't get enough power - as you'd see in the 2nd screenshot the switch detects a 802.3at device. 4 Nov 24 18:31:48 172.24.24.101 events: Access Point AP Serial Number 162...
Customer needs: Virtualize Management and AC (formerly netsight and nac) and WLAN. A must have: guest traffic must not break out in the virtual "management" environment where Netsight, NAC and WLAN resides (should reside in future). The "bridge build...
Is there a way to disable the pop-up warning that was introduced in V10.11.04 as I don't like to see it - I know that I haven't changed it and don't need a reminder. There is no warning for the controller admin password which in my opinion is far mo...
I'm currently using firmware 5.8.0 and would like to update to the latest version. But in the "Firmware" tab show "Displaying resources you are entitled to. If you do not see the resource you need or are entitled to, contact GTAC." Where I can down...
The AP was configured before to be used for demo(DHCP). Tried hard reset many times on the AP but still no go. I dunno the IP address to try SSH. Any other way to reset the AP so it could discover the controller?
