ExtremeWireless (Identifi) - Page 161 - Extreme Networks

ExtremeWireless (Identifi)

Questions and discussions about Identifi devices

Forum Posts

Sorted by:

Start a conversation

After EWC fresh install v9.21 and upgrade to v 10.01.01.0129 ap 3801i not detecting.

After EWC fresh install v9.21 and upgrade to v 10.01.01.0129 ap 3801i not detecting. AP 3801i used to be connected to dead/bricked controller. SSH'ed into AP and reset to factory. AP getting IP from DHCP - SSH'ed onto AP and I can ping controlle...

AP license migration from WLAN Controller 4110 to v2110

Hello, is it possible to migrate the Capacity Upgrade "WS-CTLCAPUP25" from WLAN Controller 4110 to Controller V2110 ? best regards peter

C25 failover mode, AP's stay on non-failed controller even after the failed controller came back up.

Hi, I'm using 2 C25 controllers in fast failover mode. Now I had to reboot one of the controllers, but it seems the other one doesn't seem to recognize that the failed one is back operational and all the AP's are now are now active on one controll...

maximum recommended clients per access point

Hello there, We noticed client disconnections in our WLAN network. The clients are connected in the 2.4Ghz band with the access point AP3805i (radio 2). I've seen, that there are 80 clients connected with this radio. So, what is the maximum recommen...

No Custom Channel Selection possible at bulk configuration

If i try to set the my 2,4 GHz channels to custom 1,6,11 (which is common here in Austria and not the suggested 1,7,13 plan) i don't have the ability to select a channel because the list in the popup that appears is empty. Does anyone have a similar...

Top Kudoed Authors

User

Count

20

11

10

8

5

GTM-P2G8KFN