ExtremeWireless (Identifi) - Page 200 - Extreme Networks

ExtremeWireless (Identifi)

Questions and discussions about Identifi devices

Forum Posts

Sorted by:

Start a conversation

Problem with C35 controller and AP3705i

AP3705i (firmware 08.21.01.0198) have problem with register to C35 (firmware 9.21.03.001) even when I add a static IP of C35. Acces point boots periodically with error 0d00:00:17: CRITICAL, Warm start firmware 08.21.01.0198 due to unspecified reason...

AP3605 randomly quits working.

We have Enterasys 3605 APs deployed in our schools. One per classroom. And a C5210 controller. I have noticed that 2 of the APs will stop working and blink red and green. The APs will be down for a week or so, then randomly come back on the network ...

Looking to see if there is a part for the 3825i that will allow me to mount it on a flat ceiling.

3825i mounting bracket

Recommended MTU size for 3805i Access Point

I See every time few ap's tunnel goes down frequently, is the MTU size the culprit , if yes what is the recommended value of MTU for Identifi 3805i Access Point. is there any global setting where all AP's MTU can be changed at a time.

IdentiFi WLAN: check for interferences and correct channel selection

Hi, i want to check in my WLAN environment if some WiFi interferences on the APs occur and if the channel selection (of the EWC) is working correct because i know my neighbours in our building also running several WLAN APs. So i expect interferences...

Top Kudoed Authors

User

Count

20

11

10

8

5

GTM-P2G8KFN