ExtremeWireless (IQE) - Page 17 - Extreme Networks

ExtremeWireless (IQE)

Questions and discussions about IQE devices (formerly known as Aerohive devices)

Forum Posts

Sorted by:

Start a conversation

Resolved! Assign SSIDs using Classification Rules question

We have three SSIDs on a network profile. If we start to use the "Assign SSID using Classification Rules" feature to assign one of the SSID's to specific APs using CCG, but leave the "Assign SSIDs using Classification Rules" blank for the other two ...

DHCP vs Static IP Addressing Issue (Aerohive AP650 / Extreme AP510C)

I have Aerohive AP650 / Extreme AP510C access points deployed with the 10.5.4.0 firmware. I have configured an "isolated" VLAN with the L3 switch acting as the gateway. If I enable DHCP on the "isolated" VLAN, which the customer does not want, the w...

Resolved! Wi-Fi Calling Poor Performance

Hi All,We have 5 AP230s and we are experiencing consistently bad performance on Wi-Fi calling. When Wi-Fi calling is enabled, it works intermittently. Calls will sometimes go through, sometimes not. Calls going out will often work for a minute and t...

Disconnect a wireless client device from EIQ?

Is there a way from EIQ to kick a device off a wireless network? In some cases I want to trigger a device to reconnect, and I don't see anyplace where I can boot them off in EIQ.Thanks

AP410c Device already onbaorded

HiI have Purchased 3 AP410c from a Recycling Center in Auckland.They All are showing Device already onbaorded, what is the process of getting the Serial numbers released and added to my account.SN 04102004210826SN 04102004210804SN 04102004210902

Top Kudoed Authors

User

Count

12

8

6

5

4

GTM-P2G8KFN