ExtremeWireless (IQE) - Page 35 - Extreme Networks

ExtremeWireless (IQE)

Questions and discussions about IQE devices (formerly known as Aerohive devices)

Forum Posts

Sorted by:

Start a conversation

Access Point only shows one radio broadcast

I have a number of Ap250s. I am using a program called Inssider which shows the channels being broadcast both 2.4Ghz and 5Ghz. I am noticing one particular ap is not showing a radio broadcasting on 5Ghz only 2.4Ghz. All of the others show both ra...

AP250 Onboard Failure - Device Already Onboarded

I purchased a couple of AP250s off eBay and one registered with my ExtremeCloud IQ connect fine and the second on failed with "Onboard Failure The following devices failed: 02501608240658Device already onboarded How do I resolve ?

Mobile Phone calling over IP and texting issues

Having issues I believe is related to delayed roaming from one AP to another. With much testing and working with support the issue seems to only effecting initial dial over wifi for calls made from ios and android phones and texting. All stationary d...

Resolved! Question about Auto Provisioning

Hi All,I use AP templates in CloudIQ to use specific port config on the ap like SNMP for example.Now i like to use auto-provisioning so that aps that come online are matched to the network policy, getting country code and the correct location. But in...

XIQ Connect Config Not Applying to Aerohive AP's

We have just set up a new account for the free ExtremeCloud IQ Connect platform and added a couple of our old Aerohive APs (AP330 and AP370) as a test (AP's were previously allocated to the Aerohive HMOL platform). The APs have been added with no pro...

Top Kudoed Authors

User

Count

13

9

6

5

5

GTM-P2G8KFN