ExtremeWireless (IQE) - Page 36 - Extreme Networks

ExtremeWireless (IQE)

Questions and discussions about IQE devices (formerly known as Aerohive devices)

Forum Posts

Sorted by:

Start a conversation

Configure EIQ / Aerohive AP as suplicant to connect to wired switch ports with 802.1x NAC?

Hello,Does anyone have experience with configuring EIQ AP's so they can do password authentication to wired network that has 802.1x NAC implemented?Seems like folks must be doing this, but it's difficult to search for since the results are all about ...

XR600P power options

Hi Sam, thanks. I find when I connect the XR600P Eth4 to either a 802.3at PoE injector or an X440 switch port the device does not boot. Is there a setting on the XR600P that needs to be changed to permit the injector or switch to recognise the XR6...

AP ATOM and AP305C

I have 1 AP ATOM Pilot in ExtremeCloud IQ No i have new AP 305C device. How can i add this to same pilot with AP ATOM? Or create new Pilot?Can they add same pilot together?//eSalo

XR600P power options

I have an XR600P that is missing it's original power supply, and cannot find a replacement part anywhere on the web.I have found by experimentation that the XR600P can be powered up if its Eth4 is connected to a Fastpath SR2208 switch (the port then ...

Disconnect a wireless client device from EIQ?

Is there a way from EIQ to kick a device off a wireless network? In some cases I want to trigger a device to reconnect, and I don't see anyplace where I can boot them off in EIQ.Thanks

Top Kudoed Authors

User

Count

12

8

6

5

4

GTM-P2G8KFN