ExtremeWireless (IQE) - Page 42 - Extreme Networks

ExtremeWireless (IQE)

Questions and discussions about IQE devices (formerly known as Aerohive devices)

Forum Posts

Sorted by:

Start a conversation

Resolved! Why not an easier way to block clients

I know im going to be talking about Extremes competition, but we used to have Rucks wifi where i work. We had a lot of AP’s, as well as an onsite ZoneDirector.if i found a client/device was doing something i didnt like, under the client/device view,...

Resolved! Classic Hive Manager accepting connections TLS v1.0

Hi,We have failed an audit because our Hive appliances are accepting TLSv1.0 connections.We are running HIve manager version 8.2.r2e which we believe is the latest version. Can we disable TLSv1.0 on this software?

Resolved! ExtremeIQ: Ho to enable probing to prevent clicks with low SNR

Hi, i just recently saw that my interface was reporting anomaly's on a lot of the AP’s I have (lots of AP650-AH), and below was its recommendation: “Recommended ActionsA low number of clients is causing high airtime utilization.Check your data rate c...

Resolved! admin email address broadcast as an ssid

Hi everybody, I have a problem with an admin email address broadcast as an ssid.I have checked the configuration of my SSIDs. the broadcast name configuration ...All is ok I do not understand how this ssid appeared.Do you have an idea ?Thank you

Resolved! Mesh APs won't connect or bad connected

Hi!Can anybody help with my problem?We have about 300 Aerohive AP130 and a handful von AP150 and we need to mesh incertain locations.The first AP is connected by wire and works fine. The next AP is mostly amesh-AP because of lack of ethernet or next ...

Top Kudoed Authors

User

Count

12

8

6

5

4

GTM-P2G8KFN