Hi, If i click on an AP, it is showing devices connected to wifi0 and wifi1, here is a screenshot of that: But if i select the AP and then go to Utilities >» Status » Advanced Channel Selection, it is showing wifi0 as disabled - link down, shown her...
This started way before summer, and I thought it was fixed. I made a minor change to the power on wifi1 interface (but basically any change i make), select the device, click on Update Device. Leave the default Update Network Policy and Configuratio...
Hello, I’ve two AP230 stuck on HiveOS 6.1r5 so impossible to connect to extremecloudiq manager. Can you send me firmware compatible with manager ?
I have to update all my AP’s to the latest firmware. When i went to do that, i saw an option that could be enabled, called distributed image upgrade. I get that it puts the imagine onto a single AP, and that AP then becomes the “server” for updati...
Hi allI setup a wireless bridge between two Extreme AP305 access points, one connected to a switch on the live network and the other to a standalone switch. I configured an access port on the standalone switch and plugged a laptop into it to test con...
