There are 1200 AP's which all are managing with VX9000 controller(Primary) and now all the ap's are having primary controller ip address but does not have secondary controller. How to push the secondary controller ip to all the AP. Kindly suggest u...
Hi you How to transfer interface to Wing Adaptive. Regards!
We have 2 no's of RFS-7000 controller which is running the firmware version of wing4 . So, we are trying push the one of RFS-7000 controller configuration to another RFS-7000 controller(which was configured with different configuration) if we apply t...
We have one VX-9000 controller which is having around 800 access points. in this scenario there is no standby controller now we are going to configure the standby controller with current setup. If active controller goes down automatically standby sh...
Hello community, Please advice with smart rf setting when using 1,5,9,13 channels instead of 1,6,11. Sensitivity level medium/high. There is some additional recommended settings for the latest mobile terminals from ZEBRA MC9200/TC20/TC25/TC56, HONEY...
