Hi Community,I configured a CaptivePortal with WiNG 7.7.1 on a VX9000 Server with AP410c AP's.When I want to check Statitics there pops up the following Error message:Does somebody know what the issue could be?Thanx in advance.Sebastian
We have installed VX9000 (7.9.1.0-022R) on ESXi (7.0.3). Everything work till adding some more VLANs and put IP 10.0.4.254 in VLAN40 and created new VLAN1 and set 10.0.9.254 IP. After that we were unable to access the controller. We put Ge1 to trunk ...
Can AP410i/e-WR and AP410C-WR co-exist in the same RF-Domain(with different profiles)?EnvironmentAP410i-WRAP410C-WRWiNG 7.9.1.0-022R
Hi,i got problem with AP8533 and proper PoE powering. I got HP Procurve 2920 PoE+ switch and connected AP8533 but when i check details of this AP there is information that used standard is 802.3af.There is no additional configuration on switch - defa...
Hi,I've had a VX9000 + 14 APs running okay since their set up at the end of last year We lost a site so we went down to 1 site, 9 APs, and I removed RF-domain for that (I don't know if that is relevant, but it's worth mentioning). We had a power out...
