Overloaded interface vlan1 in NAT config is not present

[zlinuxboy]

Hi, guys

I delete vlan 1 somewhere when config the ap7522 through WebUI. when commit the config, there is error message:

---
Detail :Not Available
Message :Overloaded interface vlan1 in NAT config is not present
ErrorPath :/wing-config/device[mac=74-67-F7-A1-AE-58]
Severity :error
Type :Application Error
**********************************
---

how to fix it?

[zlinuxboy · Accepted solution]

@Christoph S. 

1. I don’t remember location when delete it.
2. I don’t need vlan 1, and I have create another vlan as mgt vlan.
3. Thanks anyway, I have reset the ap to factorydefault, and config it again. the error message just gone.

@Chris Kelly 

yes, I config the ap through serial console right now, cli is my favorite.

[ckelly]

zlinuxboy: If you are not already doing so, you likely need to console connect to the AP to fix this.

Once in, you can re-create vlan1 - Or, you can do as stated above and just reset the AP and start over.

[Christoph_S]

1 - Where did you delete it from (profile or override)?

2 - Do you need vlan 1?

3 - Did you configure another native vlan?

You can very simply reset the AP and start anew. This will assure that all settings are reinstated. 

Thank you,