Network Architecture & Design - Page 2 - Extreme Networks

Network Architecture & Design

Questions and discussions about network architecture and design in general

Forum Posts

Sorted by:

Start a conversation

Resolved! I'm new to Extreme, how do you show unused ports on each module/stack. I have tried many of the "show ports commands

I'm new to Extreme, how do you show unused ports on each module/stack. I have tried many of the "show ports commands, but it's not want I'm looking for, thank you.

Resolved! Doubt about EAPS topology with 2 core switches

Hello guys!I'm in a scenario (in the attached draw) with 7 switches, where 2 of them are cores X460, and the 5 others are edges X440. We have EAPS configured with 5 Control VLANs and one VoIP VLAN. When the uplinks between Core 1 and Core 2 (2 red ca...

Showing Other Machines

Hello everyone, I'm wondering if anyone could provide some information on an issue I've been seeing pop up. I've noticed that whenever I do a machine lookup based on their name, Extreme will bring back other machines that have no relation to the mac...

EXOS or VOSS

Hi team!!!I have a new deployment with universal hardware switches, now we have to take a decision about the architecture:- tradicional stacks with EXOS?- flexibility SPB cloud with standalon devices?Im confused about why SPB devices can´t work on st...

Extreme to Cisco SFP+ connectivity

Hi everyone,we run an Extreme stack of some X620 and X460-G2 switches and need to connect them to a new Cisco Stack (C9300X-24Y-A switches) using 10G SFP+ cables. The cisco SFP-H10GB-ACU7M - cables, that came with the Cisco switches, don't seem to wo...

Top Kudoed Authors

User

Count

4

3

3

3

GTM-P2G8KFN