Network Architecture & Design
Questions and discussions about network architecture and design in general
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Resolved! ML-2452-PTA3M3 and AP310e

The ML-2452-PTA3M3 antenna has three antenna ports and supports MIMO.The AP310 has four (excluding BLE) antenna ports. My question - on which ports of the AccessPoint should I connect the three connectors of the antenna and which antenna settings do ...

fc76d037715a4a8ab825b521ebe14110_56f1d559-f5e7-4740-a626-d9e19ee1bcd8.jpg
_Alex_ by New Contributor
  • 3284 Views
  • 2 replies
  • 0 kudos

Extreme Campus Cotroller vs Cloud IQ

Can someone share the differences and features of both ?.Does both support NAC functions without additional licenses ? - 802.1x for wired and wireless.Do Campus Controller & CloudIQ support Wireless Access points like AP310i(WiNG), AP302W(Universal),...

eby by New Contributor
  • 3204 Views
  • 3 replies
  • 0 kudos

Extreme Campus Cotroller vs Cloud IQ

Can someone share the differences and features of both ?.Does both support NAC functions without additional licenses ? - 802.1x for wired and wireless.Do Campus Controller & CloudIQ support Wireless Access points like AP310i(WiNG), AP302W(Universal),...

eby by New Contributor
  • 2122 Views
  • 2 replies
  • 0 kudos

Resolved! How to add VX9000 to XMC wireless controllers tab

Hello, I set up XMC with all its components (netsight, analytics, fabricmgmr and NAC) running 8.2.5.50. I also set up a cluster of VX9000 running 5.9.4.1-004R with one AP8533 (same version). I would like to link the VX cluster and the AP to XMC but...

Yoann by New Contributor
  • 7265 Views
  • 7 replies
  • 0 kudos
GTM-P2G8KFN