How to create an ACL rule to block ICMPv6 traffic in entire NetworkSince ICMPV6 multicast are coming from multiple ports and flood the whole network.It is not easy to configure each and every single port to apply ACL rule.Below link ACL rule to Block...
I'm trying to fix a mess that I partly inherited and then exacerbated through ignorance. We have three X450e-48p switches on a single, flat, /24 network, one per building. One of the switches has a small port-based VLAN but essentially everything e...
http://learn.extremenetworks.com/rs/extreme/images/Pluggable-Transceivers-DS.pdf contains on page 3 the information that the MGBIC-LC03 supports 2 km with OM1 cable while at the same time the device supports ONLY 1 km with a better fiber cable of typ...
What is the best way to summarize both networks on computers BD8810 Networks are 172.22.xx 172.19.xx both in area and currently OSPF stub with the following settings BD8810-1 0.0.0.15 create ospf area 0.0.0.15 configure OSPF stub area stub NOSUMMARY...
Hi, Strange problem with packets loss. I have LAG on port 47-48 connected to 2 different switches with MLAG. I see problem only between pair: src mac f0:1f:af:d7:b5:37 and dst mac 00:18:9d:08:c8:59 rest of traffic are ok. Summit sees in f...
