Aerohive Migrated Content

How to Enable LLDP on AP250

I was wondering how to eanble LLDP on an AP250. It is enabled in the switch settings on AeroHive switch - are there any settings within the CLI for the AP to enable this?

We have an AP with the following errors. AP230 Networking: DHCP Server Unreachable/Incorrect Static IP or Gateway. I also collect TechData Note: had 2 new 250 AP's added to the area to expand coverage. any thoughts other than replacing the AP.

We have an AP with the following errors. AP230 Networking: DHCP Server Unreachable/Incorrect Static IP or Gateway. I also collect TechData Note: had 2 new 250 AP's added to the area to expand coverage. any thoughts other than replacing the AP.

Resolved! Native VLAN, Management VLAN, shouldn't be this messy...

I'm really confused about this. When I set Native VLAN on the upstream port to VLAN 1, the APs get a 192 address (default for that vlan on the meraki dhcp server). If I set the Native VLAN to 20, they get a 172.20 address. All of this is entirely exp...