Forum Posts
Resolved! Compatibility of AP122 with Netgear POE switch that has IEEE 802.3af (DTE Power Via MDI)
Hi, there is a Netgear POE switch on which Aerohive AP122 will be connected but the POE switch has IEEE 802.3af (DTE Power Via MDI) mentioned in its protocol, so will the AP122 be compatible to draw power from this switch? Regards
Resolved! AP1130 Outdoor - DC Power Option - I'm looking to power the AP using DC, the connector is some form of IP67 12vDC 3 pin. Where can I find female connector to attach for this? AH-ACC-1130-CBL-DC is not readily available in my country.
AP1130 Outdoor - DC Power Option - I'm looking to power the AP using DC, the connector is some form of IP67 12vDC 3 pin. Where can I find female connector to attach for this? AH-ACC-1130-CBL-DC is not readily available in my country.
Resolved! APs losing connection "The CAPWAP connection with HiveManager was lost."
We have one Hivemanager located in our HQ, and several APs in different locations with different IP ranges.Since Friday we can see that some of the APs in our offsite-locations, lose connection to the hivemanager and people are unable to connect to t...
Resolved! AP230's eth0 can't work as access-port.
Hello , AP230/10.0r512dc/2A Eth1 : Uplink Port.Eth0: Access Port. Client (Andriod) can't connect to the eth0 . show interface eth0:Parent interface=none;Mode=bridge-access; Mac learning= enabled; Admin state=enabled;WEB server=disable; NAT suppor...
