pi-hole as Docker-Image on XCA
I was trying to install pi-hole as docker-image on a XCA, but I didn't got it running. Is someone running pi-hole as docker-image on XCA and can Upload a screenshot of the container-settings? thanks. peter
Forum Posts
ZTP+ Switch not showing up in EMC
Hi, In the process of configuring ZTP+. The switch has been set to 'unconfigure switch all' and seems to be obtaining an IP address. After a while I've logged into the switch and I see that the ZTP connector has started: 06/25/2018 15:26:36.83 ...
Manual Add switches to Ezcloudx
Hi All, As per subject above. Does Ezcloudx portal have this option?. Currently we encounter issue which register switches has been reset to factory default and the switches including AP has lost it connection to the Ezcloudx even though receive the...
Resolved! Extreme Defender - manual onboarding issue
The manual onboarding requires the AP SN# with 14 or 16 chars BUT the AP SN# is only 10 chars long ? I've checked another one of my 3912 which is connected to my lab V2110 and it looks like because "reasonX" 00000 is added to the SN# that is printed...
Configure External Captive Portal in WinG and ExtremeCloud with External Authentication
Hi all Has someone been able to configure the correct parameters in the WinG series in order to redirect the users to authenticate to an external captive portal? The information that the GTAC or Extreme documents is not enough and does not work,...
