ExtremeCloud IQ- Site Engine Management Center - Page 358 - Extreme Networks

ExtremeCloud IQ- Site Engine Management Center

Questions and discussions about ExtremeCloud IQ-Site Engine Management Center

Forum Posts

Sorted by:

Start a conversation

Using NetSight to monitor UPS traps

I would like to use NetSight to monitor the traps from our UPS's. I currently have a few that I have added in and have set them up in a group. The issue I have is setting up alarms for them. I can setup an alarm that will activate when any traps from...

Netsight alert message

Hi all, I have an extreme network switches and for management purpose, netsight is installed on it, Every time, I received an alert message like "Severity: Clear Message: SNMP Contact Established: SNMP reply from device 172.18.160.xx, uptime is 412 D...

how to add port groups to Eaps Domain in Netsight ?

In Ridgeline you would create port groups and associate those port groups to a defined Eaps Domain and run a script to add a new vlan to those ports. How would you perform this in Netsight 6.3 ?

Automatic configuration verification with Netsight

Dear all. I need your help here. We have two identical devices which services one application. 2x G3-Series with 6.61.xxx Switch-A - active node - server are connected at this device with a single link Switch-B - hot standby if D...

How to use the Netsight to sending alarm when port without inline-power supply?

The Extreme switch X440 PoE fail always without error log. When the PoE fail, CLI "show inline-power info" will return timeout. Can I using the Netsight to notice me that the inline-power is fail? And how to create the alarm when the port without inl...

Top Kudoed Authors

User

Count

101

99

42

19

17

GTM-P2G8KFN