ExtremeCloud IQ- Site Engine Management Center - Page 393 - Extreme Networks

ExtremeCloud IQ- Site Engine Management Center

Questions and discussions about ExtremeCloud IQ-Site Engine Management Center

Forum Posts

Sorted by:

Start a conversation

Port Default Policy Role between Console and Policy Mngr is out-of-sync

Why would Console and Policy Mngr differ when viewing the default port policy role that is being applied. Policy Mngr is showing in one case 20 ports with a specific role and Console only shows the role on 10 of those ports

Planned Downtime in Netsight

Hi, is there a way to stop the processing of alarms and traps for specified devices e.g. for a planned down time, like in nagios ??

High CPU in SNMP Process

Hello, I have the following Problem. I disable and want to enable MAC Auth with Policy Manager. Since this I had a high CPU with 100%. It is possible to kill only the SNMP Process, so that i did not reboot the whole Slot. The Problem is only at one...

Old Knowledge base numbers

Hi, Is there a way to cross reference old knowledge base numbers with where the information is now in the hub? I was watching some of the Youtube video's and there was a reference to the tech note number that describes the prerequisites for the vide...

OneView Automatic Deployment

NetSight 5.1 C5-Series FW 6.81 When testing the new Automatic Deployment feature, the switch gets assigned an ip address by dhcpd but does not send a trap. Tested this without option 125, send the trap to the dhcpd ip address. Tested this with opti...

Top Kudoed Authors

User

Count

59

57

25

14

GTM-P2G8KFN