Adopting X430 onto MDF

[HeyHelpDeskGuy]

Hey all,

I’m new to EW and ES, and wanted to ask how I can adopt an extra X430 8 port switch I found to the network? 

I want to adopt it to the network because whenever I try to program a port it comes back as, Invalid input detected at '^' marker, which is always at the vlan. 

Thanks! 

[HeyHelpDeskGuy]

hey @Ronald Dvorak  I think I got this. Basically I used the command sh tech on a working X430 and got a lot of info for me to piece this together. 

Mgmt IP = 192.11.13.6  255.255.255.252

IP Route = 192.168.200.1 vr VR-Default

Once I get that added I can then add the Wifi VLAN, correct? 

[HeyHelpDeskGuy]

I forget I already have this information

[HeyHelpDeskGuy]

Will do @Ronald Dvorak ! Thank you!

[Ronald_Dvorak]

Check my screenshot again, you’d see the IP 172.25.25.156 is in VLAN 100 .

Now check with “show vlan” on a running switch to see what VLAN is used in your case to see the VLAN that is used for mgmt.

-Ron