ExtremeSwitching (EXOS/Switch Engine) - Page 152 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

ARP Validation Question

I am attempting to configure dhcp-snooping with arp validation on a lab X450e-24p. DHCP snooping seems to work fine, I configure a trusted port (24) where the DHCP server is reached off of. When I configure arp validation, I begin to get errors rel...

Unable to configure UDP-profile on VLAN: Error: Vlan is not configured for IP.

Hello, I am running ExtremeXOS version 22.7.1.2 on X770-32q. I created some VLANs and then tried to configure an UDP profile on it. I got the error message below. Error: Vlan MyVLAN is not configured for IPMay I ask if anyone has any ideas, please? ...

Resolved! 5520 switch pending -aaa login

I have two new 5520 switches I want to put in a stack. First power on I had my serial connected to the top switch. USB stick in with new firmware too since the CLI says that update required. I did the firmware update, I ran enable stacking-support...

Exos how to disable SSL3 on httpd management

On our quarterly internal vulnerability scans this keeps coming up on our EXOS switches. Example I’m looking at an X450G2 stack right now. It shows port 443 SSL v 3 is enabled. How can I disable SSL 3 and enforce TLS 1.2 only? Thanks! Oh switc...

Resolved! Is running RSTP and MSTP on the same set-up possible?

For a client set-up the vendor requires us to run RSTP on the internal network. The client wants a redundant connection to thier network with MSTP configured. Is it possible running both RSTP and MSTP on the same set-up?

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN