ExtremeSwitching (EXOS/Switch Engine) - Page 434 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Alternative method to using IP Forwarding?

We have an Extreme switch that has the following vlans. vlan1 switch interface is 192.168.10.4/24 vlan2 switch interface is 192.168.50.240/22 (so hosts are 48.0 through 51.255) vlan1 has ipforwarding enabled but vlan2 does not. We need hosts...

Initial setup on X440-g2-24p Can't ping between devices with static ip's on ports 2 and 3 (or any others)

Initial setup, Out of Box configuration... Using the default VLAN, I can't ping between two statically set ips on devices attached to ports 2 and 3. (or any other two ports) I have: configure vlan default add ports 1-28 configure vlan default ipaddr...

Not able to see Cookie Id on a Packet In on Extreme x440

We are running few VLANs in Hybrid mode (openflow enabled). But in the packet in that we get we are not able to see the cookie id. Cookie Id is 0x00000000000000 Match field is just contains the port number We were expecting the cookie id to match t...

run vm xos on vmware workstation 11

Hi All, I tried to set up a new virtual switch xos (xos 21.x)on vmware workstation 11 so I managed to get it installed but the network interfaces seem not te be UP although the are connected. I know that xos vm is supported on EXSi but what about w...

Hello. I sometimes have alarms of elrp but anybody is working with the switches!!!!!

Hello. I have a 25 Summit X460G2-48p with Data, VoIP and CCTV, I have a VLAN configured for cctv and elrp is configured. But sometimes I have alrams of LOOP in cctv vlan. I don´t no what is the problem in my switches. I have to configure somthing el...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN