Hi! Is it possible to block relayed DHCP request that doesn't contain a specific option60 or a specific range of customers source mac-adress (inbedded in the DHCP request, not source mac because the requests are relayed) in a ACL? With regards Mat...
Hi all, I am just looking at using extreme as edge switches, have been using them for core and aggregation for years. We have a large network with two central DHCP servers which we then use UDP forwarding from each user vlan. As I see it, we need ...
Wondering if there is a way to stack two commands in a single line of the EXOS CLI? For example in windows you can issue a "ipconfig /release & ipconfig /renew" in one line and it will execute both commands back to back. I need to cycle a port than...
We recently had a network event where a card in our core switch would not lock OSPF neighbors. I ended up rebooting this card and was able to restore services. However, I am confused why the network didn't alter the default route in the rest of our r...
Hello, everyone!I have 460-G2 switch with 16.2 EXOS.The problem is I can't configure syslog, using this article:https://extremeportal.force.com/ExtrArticleDetail?an=000074214Everything works fine in 15x EXOS, but not in 16.x. In 15x using the setting...
