ExtremeSwitching (EXOS/Switch Engine) - Page 567 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

ping health check XOS for PBR

Hi All, I have created a policy based routing policy to kind of simulate a "VR" on summit X440. We have a few transits connected to the Summit and these transits go to another device with VR's. Now we need to route specific subnets to specific tran...

Extreme x460 10g Modules show not supported on ver 15.7.1.4

Extreme 460 with 18 10 G SFP Ports and 8 copper ports. in SFP port when we intersert 10G Module mu lick does not comes u. When i insert 10g module in port 5 and 10 and interconnect lights power on. what can be the issue

how can i enable gui in X460 r X440

how can i enable GUI in X440 X460....i m creating vlan and give ip and enable web hhtp..but not open gui interface...? plz guide me...this is my code create vlan name configuration vlan name tag name configuration vlan name ipaddress 192.168.1.225 2...

How to do Port Specific VLAN + Routing

I need to configure routing between two VLANs with the same Port Specific VLAN, something like this: (SwitchA)10.1.1.1-------tag 100------10.1.1.2(SwitchC)192.168.1.2-----tag 100------192.168.1.1(SwitchB) How can I do this? Here is the options tha...

Changing VC Type on VPLS

How can be changed VC Type from VC Type: Ethernet (0x0005) to VLAN (0x0004) for one VPLS connection? What feature is the same as Cisco "pseudowire-class"?

Top Kudoed Authors

User

Count

28

25

18

18

17

GTM-P2G8KFN