ExtremeSwitching (Other) - Page 101 - Extreme Networks

ExtremeSwitching (Other)

Questions and discussions about switching in general

Forum Posts

Sorted by:

Start a conversation

Switch SecureStack A4H124-24 won't boot.

SecureStack A4H124-24 keep in looping and won't boot. Message: "Last switch reset caused by Fault(0x00000100) SRR0(0x012B17D4) SRR1(0x0000B002) DMISS(0x10002E8C) IMISS(0x00000000) DAR(0x00000000) DSISR(0x00000000), after 1 seconds"

Remove switches one by one in Enterasys B5 Secure Stack

I have a stack of 8 Enterasys B5 Switches in a "ring" stack. I am moving to X460G2s and have moved 3 of the bottom B5 switches to the 460 stack. So Switches 6-8 can be removed. Can I just "clear switch member 6-8" and then remove them from the sta...

2017-02-27: New GTAC Knowledge Articles February 12 - February 25, 2017

Here are the new articles that were published February 12 - February 25, 2017 in GTAC Knowledge: Sunday, February 12, 2017: none Monday, February 13, 2017: S4 not dynamically learning an arp response from a specific host/IP Tuesday, February 14, 2...

Stacking Convergence Time

One of my customer established connectivity of one edge switch (X440) through two uplinks with two core switches (X460) stacked together. If any one uplink goes down, traffic shift to other uplink takes around 57 sec for them which is too much. They ...

Need info on DAD (Duplicate Address Detection) feature support for Industrial Grade switches (ISW Series). Is it supported or not ?

Need info on DAD (Duplicate Address Detection) feature support for Industrial Grade switches (ISW Series). Is it supported or not ?

Top Kudoed Authors

User

Count

28

4

4

3

3

GTM-P2G8KFN