ExtremeSwitching (Other)
Questions and discussions about switching in general
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

ACL -> Extreme Networks 200 series

Hi EveryoneI am new in Extreme world.I have tried an easy ACL's configuration on 210-12t-GE10 and 210-12t-GE2.Scenario:On Layer 3 switch I set number 8 VLANs, every VLAN have L3 interface and ip routing enable.I need to block VLAN 8 subnet: 10.0.215....

ISW Port Configuration Assistance

Hello,I have an ISW that I'm not too familiar with that I'm trying to configure one port to tag some VLANs and to have one untagged. For example- 123 untagged then 456, 789 tagged.I can do this easily with my Summit switches, but I can't seem to crac...

T_Pitch by New Contributor III
  • 3114 Views
  • 3 replies
  • 0 kudos

X450G2 - Intrusion Reaction

Hello community,i am far from intermediate regarding Exos and i am searching for a way to block unknown devices with a little app i am currently writing for our office:This app identifies machines that are not known in the networkIf a machine is not ...

SaschaE by New Contributor
  • 1417 Views
  • 1 replies
  • 1 kudos

vsp - ers

Dear all , I have 2 core switches in the stack (VSP-8404C) and all edge switch are connected directly to the core switch. edge switches models are  (3650GTS-PWR+  , 3626GTS-PWR+ etc) everything is working when we off the core 2 , even if both switche...

IsrarA by New Contributor
  • 2163 Views
  • 2 replies
  • 0 kudos
GTM-P2G8KFN