ExtremeSwitching (Other)
Questions and discussions about switching in general
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

C3 to Cisco Router firmware issues

Hi guys. I am new with Enterasys. I have 2 cisco routers connected to a stacked c3 switch. we recently upgraded from firmware 1.02.01.0004 to 6.42.03.0004. Now the switch is hanging every 12 hours. After shutting and unshutting the 2 ports connected...

Ju_M by New Contributor
  • 827 Views
  • 1 replies
  • 0 kudos

IP address duplicate:

I ran "show iparp" on Summit X480e 48p core switch, and the output of this command indicates that there is an ip duplicate. That duplication IP address also happens to be the address of this same core switch. Right now I am up the creek without a pad...

Tandem by New Contributor
  • 1742 Views
  • 2 replies
  • 1 kudos

Enterasys S8 switch shows tbp port

When I see "code:sh port status" on Enterasys s8 switch, it given me list of tbp ports as follows:code:tbp.0.1 down up other tbp.0.2 down up other tbp.0.3 down up other tbp.0.4 down up other tbp.0.5 down up other tbp.0.6 down up...

sandeep by New Contributor
  • 1326 Views
  • 2 replies
  • 0 kudos

OpenSSL 3.0 Threats a.k.a POODLE

VN-2014-003- Poodle - OpenSSL 3.0 Threat -CVE-2014-3566 What about the 800series - that one isn't listed. IdentiFi Wireless - target release is 9.12.04 & 8.32.12 - both are out already but I don't see any information in the release notes that the b...

LSNAT on S Series

Hi there, Does anyone have a configuration example for using LSNAT on the S Series with source-NAT? I'm happy with how load balancing works without NAT, but now have a requirement to use source-NAT to hide the clients behind. The feature guide is ...

GTM-P2G8KFN