ExtremeSwitching (Other)

Howto setup antispoof o S8

We have an S8 with two ST1206-0848-F6 cards and firmware 8.31.3.2 We are trying to setup antispoof but the binding table is always empty. We have DHCP servers on ports lag.0.4-7. The commands: set antispoof dhcp-snooping enable lag.0.4-7 set antis...

S-Series DHCP problem and ip route add default, version 7.22.02.001

Greetings. I have a chassis S6 that should give for 70 DHCP address pools with mask (/ 25 and / 24). Each pool has a corresponding VLAN (30,31,32 ...). For example: VLAN 1 - 10.17.3.231/24 (ip address for switch.) VLAN 30 - ip 10.17.30.1/25 ...

Question about Cisco - Enterasys integration WLAN

We have a complete new enterasys infrastructure with some older Cisco devices. How do i have to config a cisco switch port to work together with a enterasys AP ? Our Management VLAN for the Wireless AP´s is VLAN 99 and all the Client Access VLAN´s...