I have a question
According to the concepts guide only summit x460 and x480 support IPFIX, and it does not mention the summit X670?, not supported, if this is higher than the other two switch?
Hello all,
We have a set of stacked switches running in a poorly cooled, poorly ventilated area. The warmest switch runs at ~60°C. The cut-off temperature is 67°C. A few days ago, the switch overheated while IT was closed and some users lost thei...
Good evening, I have 2 slots with stacking ( Slot1 - Master and Slot2 - Backup) how to invert the roles?
I want to make Slot1 - Backup and Slot2 - Master
Tks!!
Hi,
Currently experimenting on C3 06.61.12.0005
First
Using this policy and applying it to a port:
*********************************************
->show policy profile 3
Profile Index : 3
Profile Name : Test
Row Status ...
We're installing a Cisco 2602I based wireless solution onto a B5 three switch stack and some of the switch ports are refusing to come up when an access point is plugged into them. Checking the inlinepower status shows that the switch is providing ~4W...
