ExtremeSwitching (Other) - Page 55 - Extreme Networks

ExtremeSwitching (Other)

Questions and discussions about switching in general

Forum Posts

Sorted by:

Start a conversation

Routing the Management address over an LACP lag

I am banging my head against the table trying to get my management IP routing across a LACP lag from my 220 a Dell F10 switch. In my early troubelshooting, I was just trying to get pinging working, which it still is not over a LAG. I was able to ge...

How to configure voice and data vlan on the same 200 series switch

Hi Team, we have 2 VLANs for voice and data, we need to access both VLAN on the same 200 series switch port. what are the procedures to configure the switch port?

How to remove stack unit from extreme 220 switch

Hi Team, stacked 2 extreme 220 switches, after removing one switch from the stack and erase all start-up configuration but still showing unit 2 in the first switch. how to remove unit 2 from the first switch?

Multicast forwading inter-VLAn without default gateway, TTL=1 and PIM enabled

Hello. We have a BD8806 with several VLANs. We have PIM enabled and multicast routing between these VLANs. The problem is the following: A special IP device connects to one of the VLANs and send multicast packets that should reach the other VLANs....

Extreme 220 Series: Multiple Supplicant 802.1x (PC and Phone) on the same port

Hello I have a computer and a phone on the same switch port with different vlans working (VOIP VLAN configured). Is it possible to authenticate both (phone and computer) on the same port over dot1x (radius)? I don't find any documentation for multi...

Top Kudoed Authors

User

Count

28

4

4

3

3

GTM-P2G8KFN