ExtremeSwitching (Other)
Questions and discussions about switching in general
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Switch stack uplinks to network

I have a stack of 5 X440-48p G2 switches. I want to have a LAG uplink to the network and am wondering if the 2 ports should be on the master and backup? I configured port 1:48 & 5:48 in the LAG but node 5 is just a standby node. Should I fix the LAG ...

DH1 by New Contributor III
  • 168 Views
  • 3 replies
  • 0 kudos

Radius Authentication Not Working

Unable to access BD8810 Floor switch using Radius authentication or local authentication. Today, I added a secondary (backup) Radius server to a floor switch. I added the backup Radius server via a browser. To test the backup Radius server, I ...

Lacp lag L3 address

Hello everyone! I have an Extreme switch x620-16x. I need to configure lag port according to source OR destination IP address. So I have to configure as the following commands [configure sharing address-based ...] but the OS cann't recognize the [add...

Amir_A_N by New Contributor II
  • 352 Views
  • 4 replies
  • 1 kudos
GTM-P2G8KFN