ExtremeWireless (General) - Page 42 - Extreme Networks

ExtremeWireless (General)

Questions and discussions about wireless in general

Forum Posts

Sorted by:

Start a conversation

Resolved! How to configure XCA or XCC to authenticate domain computers using certificates EAP-TLS

Hello community,has anybody found a way to use a modern wireless controller like XCA or XCC with a client auth based on certifcates without using an NPS (we have dozens of ipad´s)I want to find a way where i can create a machine certificate on a syst...

How to enable openflow open-fail mode ?

We opened the case.I got an answer.When the connection with the controller is disconnected, it operates in secure-fail mode.The flow disappears on the switch.We need open-fail mode.I want to keep the flow even if the connection to the controller is l...

ISW Radius over Http/https

Community, I configured the switch for Radius over ssh and telnet. However, when I setup the switch for to use radius over http/https I get the following error: Insufficient Privilege Level The web page is non-accessible. Please use the valid priv...

No Intenet Connection

We have Aerohive AP250’s and Extreme B5 and X450 switches. On certain AP’s, devices (mostly Chromebooks) can connect to the SSID, receive IP Address, subnet mask and gateway via DHCP but do not have an internet connection. If the user takes the de...

Resolved! Devices disconnecting and reconnecting to same AP

Devices constantly disconnecting from one access point and immediately reconnecting to the same access point every couple of minutes,Either with Rx disassoc reason 8 <assoc-leave> or Tx disassoc reason 101 <n/a>I believe reason 8 is the AP deauthing ...

Top Kudoed Authors

User

Count

12

8

8

6

5

GTM-P2G8KFN