ExtremeWireless (Identifi)
Questions and discussions about Identifi devices
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

AP3935i - 802.3at on K-Series

Hello Hub,I guess i am not the first one who had this Problem, but I don't seem to get PoE+ out of our K-Series everytime the AP Prompts me with:**** ATTENTION LOW POWER MODE is set Radios limited to 2x2 ***Our Wireless Controllers are two 5215 runni...

b131fd38bc844ad6b9d3888ecb765531_6d98c8cb-30df-4e8c-88b2-3a0d51c139f3.png b131fd38bc844ad6b9d3888ecb765531_6844e25d-9bb5-40e2-bcdd-688a41614bb2.png
Mar100co by New Contributor
  • 1616 Views
  • 3 replies
  • 0 kudos

Resolved! AP39xx

does C2110 running on firmware 09.21.20.0001 support AP39xx? do i need to upgrade the firmware? Thanks.

APS showing as inactive

We have a bunch of 3935i APs that are showing up as inactive but all have IP addresses. They have all been updated to the latest 10.51.04.0009 firmware which is the same as our controller. We first encountered this issue when we first installed becau...

jdemo by New Contributor
  • 1854 Views
  • 4 replies
  • 0 kudos

How to prioritize WLAN\SSID from one AP

Hello, all! There 2 SSID's on 1 AP (3805). Both of them - open. But SSID1 with hotspot function based on Mikrotik - to connect, you have to watch a video ad (commercial). SSID2 - without. Main issue - after device sleep or after every Wi-Fi enablin...

Alexandr_P by Valued Contributor
  • 1040 Views
  • 3 replies
  • 0 kudos
GTM-P2G8KFN