ExtremeWireless (Identifi) - Page 90 - Extreme Networks

ExtremeWireless (Identifi)

Questions and discussions about Identifi devices

Forum Posts

Sorted by:

Start a conversation

Identifi: proper topology configuration for branches

Hello, everybody! I am testing Identify in a bank. It has HQ (where@EWC works) and several branches, connected to HQ with VPN. There is a direct visibility - I can ping resources in braches from HQ. All branches has their own Internet gateway and...

Getting Authentication request became stale, challenge sent, no response received from client when using a Apple device using 802.x OSX 11

Authentication request became stale, challenge sent, no response received from client when connecting a Apple phone using OSX 11 with 802.x. When switching from one NAC to another, the user has to forget network and re-authenticate. It's happening to...

Dual wireless controllers but can only create one DHCP server on the topology of one controller.

Hi, Have a scenario where I've created a Guest wireless that bridges out of the second Ethernet interface on a resilient pair of identfi wireless controllers. I am therefore using the internal DHCP server on the topology configuration to issue out I...

Wireless AP authentication failure.

I am seeing this message on both my Identifi Controller V2110, as well as in the Netsight Console. "A Wireless AP has attempted to connect with outdated key information. Wireless AP authentication failure. " This only seems to be occurring on the sec...

B@AP or B@EWC to save on large spanned subnets conundrum

Hi, Opening this topic up for some advise, and see what others may have done. Its good practise to building networks without large broadcast domains, so typically keeping say a /24 subnet per stack for Data and Voice. Where I'm coming unstuck is if...

Top Kudoed Authors

User

Count

20

11

10

8

5

GTM-P2G8KFN