Good morning,
there is a brief document that explains the differences and limitations using a VX9000 Controller compared with a solution using an NX appliance?
thank you,
Andrea
Hi,
I have a NX 5500 in VLAN 1 (192.168.1.1) and also have DHCP Server for vlan 10 configured in this controller. (Pool 10.10.10.2 - 10.10.10.5)
The controller is connected to a Switch in VLAN 1 (192.168.1.100) and L3 Vlan 10 (10.10.10.1) configu...
Currently I have some AP7532s set up to send traps to a trap receiver but I am getting a lot of unnecessary information (like client connection info, failed WPA authentications, etc). All I really want is a certain subset of traps, for example - the ...
Requirement -
There are two bands on WING 5.9.
One BAND will be used for RADIUS AAA Authentication
Other BAND will be used for redirecting (by captive portal functionality) to an external link
Is the above possible on WING 5.9??
Hi,
Im currently configuring AP-8533 and im using one of the unit as a virtual controller. is there by any chance we could do the bandwidth allocation in this setup? where we could only allocate certain bandwidth per client or SSID.
