Hi Extreme Community,Please help. We configured two ADSP as Primary and Secondary. But when we checked the status from the sensor (show wireless sensor-server) the Secondary is offline but it is reachable via PING. Is there anything we need to check?...
Hi Extreme Community,We configured standard SNMP configuration on ADSP controller and Juniper switch, but when we checked the SNMP discovery for the network switch is not polled on ADSP controller. Please help.Screenshot.
I recently had to request a replacement AP8432. The one that came doesn't broadcast any SSIDs. It was adopted just fine by the others and I can see it in the Extreme WiNG Manager. But it says the radios are both off because they have no country code....
We are currently running an NX5500 cluster in activ/standbuy mode version 7.5.1 we would like to change it to activ activ what do i need to do to make that happen?
Hi GuysOur VX9000 controller do not adopt the AP510i-1-WR, would you please help us with any advice/idea?Single difference that I found is the firmware where the AP510i-1-WR is having 7.7.1.0-005R and VX9000 is having 7.7.0.0-018R.On this VX9000 we h...
